Enclosed Temperature Control Emergency Shower Room

GALFDan’s emergency safety showers assist in the rapid flushing of contaminants from the body with a deluge of flushing fluid and eye/face wash units help to flush contaminants and irritants from eyes and facial area.

(1)Shower Head: Based on the American standard requirements and our unique design, one time stamping molding shower head have total 94 holes and the edge is half hole which can create the perfect water spay area.

(2)Pipe &Pull Rod: Good quality 304 stainless steel tube content with more than 8% nickel and wall thickness 3.0mm. Both inside and outside is finished with fine polishing. sophisticated materials, sophisticated technology.

(3)Spray head: One time stamping molding use seamless 304 stainless steel and combined with inner welding

(4)Flag handle: Bright Yellow. Luminous. Easy to recognize even in the dark.

(5)Nozzle: Made by 3 layers stainless steel net and layer PP net which ensure the equipment have a clean water source.
(6)There are reinforcement holding frame on three sides of the wall. Each side have five 4 * 1cm curved hole which consistent with the principle of aesthetics and practical to make the inner wall more beautiful and useful. Not only have a good reinforce of the room but also it can be set some hooks to put necessary items on it. Such as soap, eye drops, cloths etc.

(7)The floor assembled by 2 removable punch plate which have total 234 round holes. With scientific designed, 10mm diameter holes that perfectly ensure the water can be drain in time and prevent other things drop in.

Punching plate is divided into two removable pieces which is easily to disassemble and clean.

(8)30-degree angel of the bottom plate will drain the water more efficient.

(9)Windows on the Pvc sliding door not only allow people easily observe the internal situation but also make a good protection of use’s privacy.
The emergency shower enclosure consists of an emergency body shower, an eye/face fountain, a hot water storage tank and equipment to maintain the pressure and quality of the incoming water, which is heated by an immersed electric heater to 65-80 C in a stainless steel tank. When the emergency shower is activated, hot water from the tank is mixed with cold water from the mains using a thermostatic mixing valve.
(1)Shower Head: Based on the American standard requirements and our unique design, one time stamping molding shower head have total 94 holes and the edge is half hole which can create the perfect water spay area.

(2)Pipe &Pull Rod: Good quality 304 stainless steel tube content with more than 8% nickel and wall thickness 3.0mm. Both inside and outside is finished with fine polishing. sophisticated materials, sophisticated technology.

(3)Spray head: One time stamping molding use seamless 304 stainless steel and combined with inner welding

(4)Flag handle: Bright Yellow. Luminous. Easy to recognize even in the dark.

(5)Nozzle: Made by 3 layers stainless steel net and layer PP net which ensure the equipment have a clean water source.
(6)There are reinforcement holding frame on three sides of the wall. Each side have five 4 * 1cm curved hole which consistent with the principle of aesthetics and practical to make the inner wall more beautiful and useful. Not only have a good reinforce of the room but also it can be set some hooks to put necessary items on it. Such as soap, eye drops, cloths etc.

(7)The floor assembled by 2 removable punch plate which have total 234 round holes. With scientific designed, 10mm diameter holes that perfectly ensure the water can be drain in time and prevent other things drop in.

Punching plate is divided into two removable pieces which is easily to disassemble and clean.

(8)30-degree angel of the bottom plate will drain the water more efficient.

(9)Windows on the Pvc sliding door not only allow people easily observe the internal situation but also make a good protection of use’s privacy.
(10)There have water tank above the shower head equipped automatic water refilling device than will start work once water storage is low.
(11)The tank is equipped with both water heating and water cooling functions. Provide you with a more comfortable and more reliable using experience in anytime.
(12)The external handling box is been reinforced and can be operated under various poor conditions.

(13)The top of the tank has an alarm light and it will be tricked once the room in using.

(14) Customize is available

Frame material: stainless steel AISI 304/316
Wall material: sandwich panels (polyisocyanurate foam PIR), stainless steel
Water consumption: Body shower – 75 l/min, Fountain for eyes/face – 12 l/min
Water pressure: 2-6 bar
Connection: Input – external thread 1 1/4″, Drain – external thread 2″.
Activation: Hand lever, pedals
Power supply: 3/N/PE 220V 50Hz (Three-phase power supply)
Email power: 4.5 – 5 kW
Pace. mode: -45C +40C
Completeness: Instructions for assembly, installation and operation, Passport, badge “Emergency shower”.

Warranty period for the delivered goods: 12 months from the date of signing the transfer acceptance certificate